Jump to content

Thruster88

First Class Member
 View Profile  See their activity

  • Posts

    3,631

  • Joined

  • Last visited

  • Days Won

    82

 Content Type 

Everything posted by Thruster88

  1. Thruster88
    I would go with the dent. Try squeezing your garden hose down to half diameter with your thumb, minimal flow reduction. I would form the dent in a press using 50-60mm bar stock on the same angle as the engine mount tube.
  2. Thruster88
    Self declared has been working just fine with RAAus for 41 years now.
  3. Thruster88
    From the February casa brief Director of Aviation Safety, Pip Spence We're launching into 2024 with the much-anticipated introduction of the Class 5 medical self-declaration scheme. It allows many private and recreational pilots to self-assess and self-declare without the need to see a doctor. It's a significant initiative we've been progressing as part of our General Aviation Workplan aimed at reducing unnecessary cost burdens and simplifying regulatory processes. While the Class 5 won't meet everyone's needs, it was informed by strong feedback to introduce a scheme that didn't involve a doctor, is based on comprehensive risk analysis and a careful examination of what other safety authorities do overseas. The fact that Australia is the first jurisdiction where pilots will not have to see a doctor or medical practitioner made it difficult to find comparative data on the likelihood of impairment or a related accident. That's why we've taken an initially conservative approach and put in place operational limitations on what you can do when flying with a Class 5. We've noted your feedback on the need to keep looking at the operational limitations and we'll continue to gather safety and risk data to inform future decisions on whether we can remove or relax the restrictions.
  4. Thruster88
    Some time in February 40 years ago I did my solo in brand new out of the box Wheeler Skycraft Scout mk3. Fearless, cautious, somewhat knowledgeable about how aircraft fly at age 21, it all went well. The three axis 18hp scout was a very good performer with a light pilot. Sold it after a year and moved on to a Thruster.
  5. Thruster88
    I think turning down wind in ag ops has some things to think about. The aircraft is making a climbing turn from the surface and can be seeing an increasing tail wind due wind gradient. Also remember they are turning back to the next pass in a racetrack pattern so more bank and yank may be required compared to turning up wind. I agree the down wind turn is a myth if you are not concerned with the actual location of the aircraft at the completion of the turn.
  6. Thruster88
    Good point, they probably fly correct airspeed or angle of attack, which ever is their preferred method.
  7. Thruster88
    There is no stall speed limit for group G. This would allow my RV6a, 53kts stall to be eligible. Mine is definitely staying VH reg. If I can't pass a class 2 medical or the new class 5 then it will be sold. I feel it would be worth more with VH reg.
  8. Thruster88
    At the commencement of the base turn the adsb data is showing 79 knots ground speed and 1500 baro altitude. Shortly after plus 50 knots and 800 feet lost.
  9. Thruster88
    Very unlikely the seat slid back. All Cessnas have a secondary seat stop fitted now. Checking this and the seat rails is done at each annual. ADSB data shows the aircraft pitching down not up.
  10. Thruster88
    It sounds very complicated and a lot of work. Have been flying a potential group G RV for the last 3 years, not sure what I am missing.
  11. Thruster88
    My Thruster t500 ultralight originally had a 64 inch two blade on the 65hp rotax 582. (2500 prop rpm at full power). A four blade ground adjustable 64 inch should work well with 130hp and would give you another 3.5 inch clearance. I would talk to Viking, they would have come across this problem before.
  12. Thruster88
    These are Sydney airports corporation contractors.
  13. Thruster88
    Viking engine?
  14. Thruster88
    Good news, 65% is still a lot of kits. Van's Resumes Shipping Kits, 65 Percent Of Customers Renew Orders - AVweb WWW.AVWEB.COM Van’s Aircraft says 65% of customers have agreed to pay more for their kits and more than 100 of those kits have now been shipped. The company, which went into bankruptcy a month ago, says it’s ramping...
  15. Thruster88
    Some good news. 65% is a good number, still a big number. Van's Resumes Shipping Kits, 65 Percent Of Customers Renew Orders - AVweb WWW.AVWEB.COM Van’s Aircraft says 65% of customers have agreed to pay more for their kits and more than 100 of those kits have now been shipped. The company, which went into bankruptcy a month ago, says it’s...
  16. Thruster88
    No but you can't frighten a Triton.
  17. Thruster88
    The length of the orifice is also important. The differential pressure tester is designed to check the compression of aircraft engines by measuring the leakage through the cylinders caused by worn or damaged components. (1) For an engine cylinder having less than a 5.00-inch bore; 0.040-inch orifice diameter; . 250 inch long; and a 60-degree approach angle.
  18. Thruster88
    Installation and 100.5 checks cost $2200, total cost just over 10k so got 1/2 back. My application number was 728 so a nice increase in equipped aircraft.
  19. Thruster88
    Just received my rebate for uAvionix tailbeaconX transponder and AV30C control head/EFIS. Removed the Vac system completely and saved 4.5kg. Stil use SkyEcho2 for traffic in on the tablet. It can see the tailbeaconX so a constant verification that adsb out and in is working. The AV30 is a beautiful little EFIS for those that like a traditional 6 pack, gives redundancy of airspeed and alt. Still a few months left to get a rebate.
  20. Thruster88
    I don't see runway elevator trim driving a tecnam or any LSA into the ground. Much bigger aircraft yes it has happened. We have a P92 super eglet in the shop atm. It has electric elevator trim between the seats, nice logical rocker switch. Takes 12 seconds for full travel. My Musketeer also has a stabilator with trim/anti servo tab. For my own education I have wound on full trim (manual) to see what the resulting control force is like. Yes mildly scary, about 25-30 kg of force required to maintain level flight. The trim tab on the Musketeer is about 4 times larger and both aircraft fly at about the same speed.
  21. Thruster88
    These mechanical pressure gauge plugs have a small protrusion in the plug which should be sliced off leaving a small hole when the gauge is put in service. They are plugged so as not to leak damping fluid while in transit.
  22. Thruster88
    Disruption of the wing and fuselage buckling behind cockpit.
  23. Thruster88
    Sadly it looks like another stall spin.
  24. Thruster88
    I will also recommend Buy an aircraft by searching Plane Sales Australias aircraft marketplace WWW.PLANESALES.COM.AU Search and Buy Used or New Aircraft for sale by using Australia's best aircraft marketplace Recently sold aircraft for a friend using plane sales, had very good enquiry and was sold in less than two weeks. They have the best simple website that works.
  25. Thruster88
    Probably no beta available
×
×
  • Create New...