BrendAn Posted November 9 Posted November 9 (edited) 4 minutes ago, facthunter said: It gives you all the reasons why the Oils has to be very special and the ONLY oil specifically formulated is the ONE most suited. Nev jabiru advantage is air cooling and direct drive. no slipper clutches and gearboxs to lubricate. not that it helps skippys predicament i would have thought a quality synthetic motor cycle oil would be more than suitable for a 912. Edited November 9 by BrendAn
skippydiesel Posted November 9 Author Posted November 9 8 hours ago, BrendAn said: jabiru advantage is air cooling and direct drive. no slipper clutches and gearboxs to lubricate. These are also its disadvantage but thats a debate for another Thread. not that it helps skippys predicament - No predicament just hoping to benefit from some one else's experince/recommendation. i would have thought a quality synthetic motor cycle oil would be more than suitable for a 912. Again this is a hot topic that has been discussed many times - in short Rotax previously recommended several oils (mainly of the motorcycle type) that are still used by some, to good effect. In resent times Rotax have limited their recommendation to Aeroshell Sport Plus 4 & their in house product XPS, a full synthetic oil (initially developed for a heat issue, with certain engines, that can tolerate/suspend high lead content) 😈
skippydiesel Posted November 9 Author Posted November 9 1 hour ago, BurnieM said: Is XPS available ? What is the current price ? Interesting question - I have never used or intend to use it, as it's well & truly over specified (& costed) for a 912ULS. Apparently it can only be purchased through a Rotax distributor (B Flood in Au). I am unable to find an online Au price for Aviation XPS (about $20 US) however Go-Kart XPS, in a black bottle (aviation is white) sells for around $44/L. I don't know what difference (if any) there is between the Kart & Aviation XPS oil. 😈
BurnieM Posted November 9 Posted November 9 1 hour ago, skippydiesel said: Interesting question - I have never used or intend to use it, as it's well & truly over specified (& costed) for a 912ULS. Apparently it can only be purchased through a Rotax distributor (B Flood in Au). I am unable to find an online Au price for Aviation XPS (about $20 US) however Go-Kart XPS, in a black bottle (aviation is white) sells for around $44/L. I don't know what difference (if any) there is between the Kart & Aviation XPS oil. 😈 Very different oils. XPS for Rotax aviation engines is labeled XPS 5W-50 Full Synthetic aviation engine oil Just rang Bert Flood and they are expecting a delivery of XPS later this week. Price is $44/litre with no discount if you buy a box of 12. Delivery to Sydney approx $60. Unless you have a 916 probably better to go with AeroShell. 1 1
skippydiesel Posted Tuesday at 02:47 AM Author Posted Tuesday at 02:47 AM "Just rang Bert Flood and they are expecting a delivery of XPS later this week. Price is $44/litre with no discount if you buy a box of 12. Delivery to Sydney approx $60" Wow!!!! With a bit of effort, I am hoping that I can get Aeroshell Sport Plus 4, for about $20.50/ L delivered 😈
facthunter Posted Tuesday at 08:22 AM Posted Tuesday at 08:22 AM (edited) Welcome Back Vev. Nev Edited Tuesday at 08:23 AM by facthunter typo
BurnieM Posted Tuesday at 10:09 PM Posted Tuesday at 10:09 PM As I understand it; if your plane is certified or factory built then you need to use an oil specified by the manufacturer. All the manufacturers I have seen have said use the oil Rotax recommends. If your plane is amateur built then you are the manufacturer and can use whatever you like (flame suit on). Rotax forums have many examples of US owners using motorcycle oils for years with no wear and tear issues. Most motorcycle oils are designed for combined engine. gearbox and clutch use which makes them ideal for Rotax use. Avoid oils designed for Harleys as they are a different formulation. Semi-synthetic and synthetic oils handle heat better than mineral oils and so are normally recommended. Full synthetic oils have problems suspending the lead in 100LL so are not normally recommended for use with this fuel. Full synthetic are very good at handling high heat loads and if you are only using Mogas they are still an option. Rotax spent a long time finding an additive package that would handle 100LL for its full synthetic XPS and is the only known full synthetic recommended for 100LL use. 1 1
facthunter Posted Tuesday at 10:41 PM Posted Tuesday at 10:41 PM Rotax is the Manufacturer of the engine. Nev 1
BurnieM Posted Tuesday at 10:44 PM Posted Tuesday at 10:44 PM (edited) 7 minutes ago, facthunter said: Rotax is the Manufacturer of the engine. Nev Most of the regs are based on the manufacturer of the plane. For certified and factory built planes it is very common for the plane manufacturer to say service the engine according to the requirements of the engine manufacturer but this is not how the regs read. For amateur built you are the manufacturer (of the whole plane). Edited Tuesday at 10:49 PM by BurnieM 2 1
sfGnome Posted Tuesday at 11:26 PM Posted Tuesday at 11:26 PM I wonder (and this is pure conjecture - I have zero knowledge here) whether your permit to fly over built-up areas is affected by doing something non-standard with the engine. I’m thinking that the built-up areas permit is based on, among other things, the aircraft having a regular aircraft engine. 1
facthunter Posted Wednesday at 02:58 AM Posted Wednesday at 02:58 AM Manufacturer of the WHOLE Plane when you Purchased a complete VH certified Motor. Who are you Kidding? Nev
BurnieM Posted Wednesday at 06:14 AM Posted Wednesday at 06:14 AM (edited) Not saying they (or anybody) made it just they are deemed to be the manufacturer with the legal responsibilities that go with that. ie Boeing are the manufacturer of the 737 Max even tho CFM make the engines and Collins and Honeywell make the avionics and many third parties supply parts. Edited Wednesday at 06:16 AM by BurnieM 2
skippydiesel Posted Saturday at 11:32 PM Author Posted Saturday at 11:32 PM Considering Penrite @ about $18/L (4 L container) NOTE: Can not be used if burning AvGas (Leaded fuel) "MC-4 FULL SYNTHETIC 10W-40 is a premium full synthetic, SAE 10W-40, non friction modified, modern 4 stroke engine oil. It contains a superior anti wear package of FULL ZINC (exceeding 1200+ ppm) for ultimate engine, gearbox & clutch protection combined with the latest engine oil technology that provides protection against wear, corrosion, oil oxidation, piston deposits and sludge under all conditions. It exceeds the requirements of API SN/CF and JASO MA. APPLICATION MC-4 FULL SYNTHETIC 10W-40 is designed for use in all four stroke road & sports bikes, dirt & enduro bikes, ATV's/Quad bikes and scooters that require a full synthetic engine oil. It is also equally suitable for use in transmissions with wet clutch systems where engine & gearbox oils are combined. It has optimum clutch slip prevention in these systems and exceeds JASO MA requirements. MC-4 FULL SYNTHETIC 10W-40 is a full synthetic base engine oil providing superior oil film strength, heat resistance and oil shear protection. It provides an un-paralleled layer of protection for engine compression & oil sealing rings, cylinder sleeve lubrication, bearing and valve train. MC-4 FULL SYNTHETIC 10W-40 is also suitable for use in other four stroke engines such as stationary engines & generators or other vehicles that require this grade and specification of engine oil and can be used with petrol, racing & other conventional fuels. PRODUCT BENEFITS FULL SYNTHETIC base oils for maximum heat resistance and high performance FULL ZINC anti-wear additive package for ultimate engine wear protection. LATEST oil technology for maximum wear protection, minimum sludge formation & reduced piston deposits SHEAR STABLE formulation protects against viscosity loss FACTORY PROVEN by competition race teams and trusted protection for performance engines MAXIMUM power & acceleration Suitable for use with wet clutch systems (JASO MA) Extends engine life by reducing formation of high temperature engine deposits INDUSTRY SPECIFICATIONS API SN/CF, SM, SL, SH, SG JASO MA" 😈 2
facthunter Posted Saturday at 11:58 PM Posted Saturday at 11:58 PM Are You setting yourself up as a Lubricant Expert now? You better get Lawyered up. You are dangerous. Oils ain't oils with AIRCRAFT, especially with Rotax. Nev
skippydiesel Posted 21 hours ago Author Posted 21 hours ago Further consideration - Lowes petroleum $273.10 / 12 = $22.76. Another full synthetic that you should not use Avgas with ; Mobil 1 Racing 4T /MX4T Overview & Specifications Product Type: Advanced full synthetic four-stroke motorcycle engine oil (SAE 10W-40) [1, 2] Applications: High-performance four-stroke motorcycles, sport bikes, and engines with common or separate transmission and wet-clutch systems (also compatible with selected Rotax 4-stroke aircraft engines). [1, 2, 3] Industry Standards: Meets or exceeds API SN, SM, SL, SJ and JASO MA2, JASO MA requirements. [1, 2, 3] Key Features: Optimized frictional properties for maximum power output, high-temperature thermal and oxidation stability, superior wet-clutch control, and low-temperature fluidity for reduced startup wear. [1, 2, 3] 😈
skippydiesel Posted 19 hours ago Author Posted 19 hours ago On 08/11/2026 at 7:35 PM, skippydiesel said: Update; On 08/11/2026 at 7:35 PM, skippydiesel said: Horsham $371 = $31/L Viva $245?? = $20.42/L Atom $267?? = $22.25/L Simorg $308 = $25.67/L CJ Aerospace$?? The Aviator Store $40 / L PM & Aviation $16 /L - This sounds a bit too good to be true, but I live in hope. 😈
skippydiesel Posted 18 hours ago Author Posted 18 hours ago Just received this from PM & Aviation; "...............Unfortunately there is no Spots Plus 4 in the world at this time. The additive that is used to make Sports Plus 4 comes from Qatar and the factory was boomed. Shell is trying to get another factory set up in France. So what is the alternative? Right now you have two choices, you can go with the very expensive Rotax oil, or you can use Penrite HPR5. The Penrite oil is the only one that I have been able to find that is suitable for use in Rotax engines................." 😈 1
BrendAn Posted 17 hours ago Posted 17 hours ago 10 minutes ago, skippydiesel said: Just received this from PM & Aviation; "...............Unfortunately there is no Spots Plus 4 in the world at this time. The additive that is used to make Sports Plus 4 comes from Qatar and the factory was boomed. Shell is trying to get another factory set up in France. So what is the alternative? Right now you have two choices, you can go with the very expensive Rotax oil, or you can use Penrite HPR5. The Penrite oil is the only one that I have been able to find that is suitable for use in Rotax engines................." 😈 The Qatar factory was boomed. Must be sonic warfare.😁 1
Blueadventures Posted 17 hours ago Posted 17 hours ago A mate who flew up to have an annual done bought the last 3 one litre packs from P&M. 1
skippydiesel Posted 15 hours ago Author Posted 15 hours ago I asked PM & Aviation, about Mobil 1 Racing 4T / MX4T and Penrite MC4. This is the response; "The one thing you need to remember is that any oil you buy must not have a detergent agent in it. All 912 engines as you know are dry sump. That’s why I can only recommend the HPR5 as it was designed for Rotax engines. I have spoken to the technical department from all the manufacturers of oils and the only one that I could find that the technician would recommend was the HPR5" I have never heard about not having " a detergent agent in" a Rotax oil before. In fact I have assumed, since about 1980, that all automotive/crankcase oils contained detergents. 😈 1
BurnieM Posted 15 hours ago Posted 15 hours ago It is a bit of a problem as if you mention 'for aviation use' they can sometimes catch the NGK disease. 1
skippydiesel Posted 14 hours ago Author Posted 14 hours ago 17 minutes ago, BurnieM said: It is a bit of a problem as if you mention 'for aviation use' they can sometimes catch the NGK disease. The PM& Aviation person volunteered their advice/information ie I did not initially ask for it. I have learnt, like most of us, not to disclose the application (aircraft) to a non aviation supplier. All too often the communicator stops abruptly, when aircraft are mentioned. 😈 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now