Jump to content

Lyndon

Members
 View Profile  See their activity

  • Posts

    683

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Lyndon

  1. Lyndon
    I'm just thinking the engineering staff who designed this are a lot smarter than me
  2. Lyndon
    So the plates are on the outside. Then I have a nice edge inside for the cowling makes sense
  3. Lyndon
    Well if it's designed to be inside then that's what it will be . Thanks Lyndon
  4. Lyndon
    Ok I sorted the plates. Now I will look into where the cowel should be .
  5. Lyndon
    I realize this but why would one not put it on the outside. It just makes common sense like roofing tiles
  6. Lyndon
    Would make sense to put it on the outside surely for air flow
  7. Lyndon
    I'm mounting the four plates that reinforces the cowling mounts. The manual is just mumbo jumbo. I use the black rivets but where and why. Then it says use soft rivets but does not make sense where or why. Lyndon
  8. Lyndon
    No worries. Makes sense. Main concern is its clecoed up and some holes that I'm not using yet do over lap a bit. It's one of the very few bits that once are are joined you really can't get it wrong. I'm presuming they just weren't stamped quite perfect. Lyndon
  9. Lyndon
    Is that aimed at me or Dennis
  10. Lyndon
    No worries. I will go ahead with this riveting. I would rather wait a day than drill em out . Thanks Lyndon
  11. Lyndon
    Firewall issues. I'm not happy to rivet it up yet in case I have wrong. I don't believe I have but ???. Am I missing something. Quite a few don't line up. Also I take the bottom engine mounts have to be drilled at some stage as there is no corresponding holes in the sheet and the fire wall.
  12. Lyndon
    And blanked off holes
  13. Lyndon
    Firewall holes not quite right. It's together but the holes don't quite line up. Any tips. Lyndon
  14. Lyndon
    All sorted. Looks better on the inside. Will rivet it up today. Thanks for all the input. Lyndon
  15. Lyndon
    Apparently the floor can be on the top or bottom. Makes no difference. But aesthetically looks better on top. Lyndon
  16. Lyndon
    The pics I have are from Reg. Thus the floor on the bottom. Thus the way its been put together. ??? The manual is not clear. So maybe that is where the confusion is. Just because a build is a particular way doesn't mean it is correct. I'm new to this so I have no idea. I can see pros and cons with the floor on the bottom and inside. I will ask Reg to confirm. Thanks Lyndon
  17. Lyndon
    Does that refer to the front panels. I did read read that in the manual early in the piece. Once again I'm only going by the video supplied in the kit ??? All very confusing. Lyndon
  18. Lyndon
    Before I completely rivet it up some opinions please. Now is the time to get right. Thanks Lyndon
  19. Lyndon
    Once again on the outside. ??? Mmmm
  20. Lyndon
    As per Reg CD it's on the outside. That's what I went by
  21. Lyndon
    I can't open your file.but I I know what you mean . Lyndon
  22. Lyndon
    I have the floor on the outside. Bugger. Mmm
  23. Lyndon
    About to rivet up the floor. From underneath it will look nice from outside. But under the carpet not so good. Or vice a versa. Is it riveted from inside or outside ??? Thanks Lyndon
  24. Lyndon
    All sorted. I had the front landing gear loneron upside down. Yep I'm an idiot but I worked it out before any rivets Lyndon
  25. Lyndon
    2 is below 1. I know this the manual states it. I believe 2 is below 3 as my Reg videos. But where is 1 in relation to 3. The Reg video shows below and above in two builds. Manual tells me nothing. Thanks Lyndon
×
×
  • Create New...