FlyingVizsla Posted Saturday at 06:55 AM Posted Saturday at 06:55 AM https://www.abc.net.au/news/2026-10-10/light-aircraft-crash-muchea/107251682 A light aircraft plunged into a field north of Perth on Saturday, with the two men on board surviving the crash with non-life-threatening injuries. Police said the pilot of the single-engine aircraft crashed near the Greenside private airfield, off Brand Highway in Muchea, north-east of Perth, this morning. The aircraft crashed around 250 metres from the airfield's runway. 3
Blueadventures Posted Saturday at 07:11 AM Posted Saturday at 07:11 AM Wow, terrible news as looks a hard hit and engine ripped out, likely an RV6 or similar. Hope they fully recover quickly. 1 1
Gadjet Posted Saturday at 07:36 AM Posted Saturday at 07:36 AM Zoom in on the photo possibly shows VH-FSM which matches the area of operation. 2
RenegadeMan Posted Saturday at 12:26 PM Posted Saturday at 12:26 PM 4 hours ago, Gadjet said: Zoom in on the photo possibly shows VH-FSM which matches the area of operation. Yes, if you look carefully at this image from the channel 7 news website you can see it's VH-FSM. God speed their recoveries! 1
BirdDog Posted Saturday at 08:38 PM Posted Saturday at 08:38 PM FSM. Rv 6 with IO-360 A1A very glad they survived. 1
BurnieM Posted Saturday at 10:30 PM Posted Saturday at 10:30 PM https://aviation-safety.net/wikibase/583136 1
Thruster88 Posted Sunday at 07:27 AM Posted Sunday at 07:27 AM As an owner of a RV6A with a similar paint scheme the pics of the crashed aircraft are somewhat disturbing. Thankfully not a fatal accident. The damage to the leading edge at the outbound end of the fuel tank and failure of the engine mounts in overload have me wondering what has happened here. Hopefully the ATSB will do one of their quick investigations. 2
facthunter Posted Sunday at 07:55 AM Posted Sunday at 07:55 AM A lot of decelerative force. Maybe it stalled? RoD? Nev
Blueadventures Posted Sunday at 08:26 AM Posted Sunday at 08:26 AM 29 minutes ago, facthunter said: A lot of decelerative force. Maybe it stalled? RoD? Nev Looks compression from port leading edge tip and engine out port side of cowl.
facthunter Posted yesterday at 07:18 AM Posted yesterday at 07:18 AM There was some Later advice that they were not in good shape. Sorry I lost the reference to it. Someone may be able to help out. Nev
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now