Lyndon
-
Posts
656 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Store
Aircraft
Resources
Tutorials
Articles
Classifieds
Movies
Books
Community Map
Quizzes
Videos Directory
Everything posted by Lyndon
-
I have come to the end of my parts. But I can't find where these go. Any ideas ??? The straps with the part numbers Thanks Lyndon
-
Engine cowl. Im setting this up. From what I see of the manual which is very confusing ... I have to cut the lower to fit re the muffler. Then the lower is attached by 1 zus on each side and 2 on the upper. So the lower cowl has six zus fasteners. Then the top is fastened to the lower cowl. Is this all that holds it on ??? Also my manual states a bracket bracket but its not clear where it goes. ( as per pic) Any help would be great. Thanks Lyndon
-
That looks like a good set up. I'm thinking one throttle only. There is no need for a passenger one im thinking. Lyndon
-
With dual throttles.where does it double up. At the carbs ????. Lyndon
-
Great. I will have a close look at it. They work with dual throttles ??? Lyndon
-
Do you have some info on your throttle cables ??
-
It does look like it won't clear. From what see the leg has about 3 plus inches of travel. Lyndon
-
Progress. After a long break. Lyndon
-
I have just noticed my front wheel leg will come close to my throttle linkage. In fact it looks it will hit. Unless I pull it apart to check. Can some one look at their plane to confirm if this correct. I can't see how it can be done incorrectly. But ??? Thanks Lyndon.
-
I read the user manual with interest. It says wire the fuel tap on but with small enough wire that it can be overridden by breaking it to turn the tap off. Lyndon
-
Cables. I'm interested in knowing if the choke. Heater. Air box heater cables benefit from grease or lube or best kept dry. ??? Lyndon
-
Gauge readings. I'm wanting to put some thin tape on where I can expect Oil pressure Head temps Oil temp Fuel pressure Oil temp What are normal readings for a Savannah vg in your experience. Lyndon
-
I fixed it with two cable ties wrapped around the body. Its light and a tight fit anyway. These just lock it in. Lyndon
-
I'm fitting my oat gauge at the moment. Its a vdo plastic unit. Two long bolts slide in the body then two brackets mount on each side. Its not at all correct and they just splay. Has anyone come across this before. Lyndon
-
Makes sense. Will chase up the manual Lyndon
-
Is there a formula using this air box temp. Been a long time since i flown but have never come across it. Lyndon
-
Is this in relation to carby heat. I understand tge oat but not the airbox.
-
Still would like to know why two temp sensors. Lyndon
-
Great I will get one Lyndon
-
Done.I will buy the sensor and fit it. Can you explain why there are two. I take it at some point heat is applied to the air cleaner. Lyndon
-
Peter would you fit it . ???
-
My manual shows no sensor in the air box what so ever. Only the external one behind the seats. It does however refer to a switch that can be mounted on the dash to switch between these two sensors. Thus my question is it worth getting. My kit is over 10 years old and it may well be not a good manual like the the later ones. Lyndon
-
Thanks for the info. I have only found one sensor in my kit and have fitted to the fuselage inside near the fuel tank header tank. It looks like it's an option with what goes in the air box. I take it must be air box tempt. I will look again but in thought two lenghts were on offer for the Ariel cable lengths. Under will work well for running the cable etc Lyndon
-
I'm back on my plane. I had an accident last November on my bike. Anyway I'm all good now. Two questions. I have a female thread in my air cleaner. I take it an option for some sensor. Thoughts ??? Get it or just blank bit off. Secondly. I'm looking at my radio. The 760 that fits neatly in the dash. How much Ariel do I need to order with it and where to put the areil. Or if some one has a better idea I'm all ears. I'm not overly fussed with it as I want a cheap unit that work's ok with a pair of head sets. Lyndon
-
Atf. Sounds good and cheap. No issues with it ??? Lyndon
