Jump to content

Lyndon

Members
 View Profile  See their activity

  • Posts

    699

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Lyndon

  1. Lyndon
    No worries. I will go ahead with this riveting. I would rather wait a day than drill em out . Thanks Lyndon
  2. Lyndon
    Firewall issues. I'm not happy to rivet it up yet in case I have wrong. I don't believe I have but ???. Am I missing something. Quite a few don't line up. Also I take the bottom engine mounts have to be drilled at some stage as there is no corresponding holes in the sheet and the fire wall.
  3. Lyndon
    And blanked off holes
  4. Lyndon
    Firewall holes not quite right. It's together but the holes don't quite line up. Any tips. Lyndon
  5. Lyndon
    All sorted. Looks better on the inside. Will rivet it up today. Thanks for all the input. Lyndon
  6. Lyndon
    Apparently the floor can be on the top or bottom. Makes no difference. But aesthetically looks better on top. Lyndon
  7. Lyndon
    The pics I have are from Reg. Thus the floor on the bottom. Thus the way its been put together. ??? The manual is not clear. So maybe that is where the confusion is. Just because a build is a particular way doesn't mean it is correct. I'm new to this so I have no idea. I can see pros and cons with the floor on the bottom and inside. I will ask Reg to confirm. Thanks Lyndon
  8. Lyndon
    Does that refer to the front panels. I did read read that in the manual early in the piece. Once again I'm only going by the video supplied in the kit ??? All very confusing. Lyndon
  9. Lyndon
    Before I completely rivet it up some opinions please. Now is the time to get right. Thanks Lyndon
  10. Lyndon
    Once again on the outside. ??? Mmmm
  11. Lyndon
    As per Reg CD it's on the outside. That's what I went by
  12. Lyndon
    I can't open your file.but I I know what you mean . Lyndon
  13. Lyndon
    I have the floor on the outside. Bugger. Mmm
  14. Lyndon
    About to rivet up the floor. From underneath it will look nice from outside. But under the carpet not so good. Or vice a versa. Is it riveted from inside or outside ??? Thanks Lyndon
  15. Lyndon
    All sorted. I had the front landing gear loneron upside down. Yep I'm an idiot but I worked it out before any rivets Lyndon
  16. Lyndon
    2 is below 1. I know this the manual states it. I believe 2 is below 3 as my Reg videos. But where is 1 in relation to 3. The Reg video shows below and above in two builds. Manual tells me nothing. Thanks Lyndon
  17. Lyndon
    One shows this
  18. Lyndon
    I have Reg s video. Two builds. One shows this
  19. Lyndon
    Nothing conclusive bin the manual at all. But in my build video pics I was right first time. It goes on top . Thanks Lyndon
  20. Lyndon
    So the way I have it now is correct. The manual generally has diagrams with how brackets and sheets are lined up but with this top bracket the manual is quite unclear. The frame tubes fit perfectly as I have them now. Thanks Lyndon
  21. Lyndon
    Or ???
  22. Lyndon
    Little unclear here. The top skin is attached to something at a later stage. The top bracket is to be fitted now. Looks like the top skin is bent up and riveted to the top bracket in the corners ???? True or false ??? Lyndon
  23. Lyndon
    Sorted
  24. Lyndon
    Ta I have worked out it needs to on the rear as per the cut outs on the down sides of rib 8
  25. Lyndon
    Looks tight and needs to bent quite I bit to get the angle ??? Am I on the right track or ???? Thanks Lyndon
×
×
  • Create New...