dominicm

Created by master RC designer and builder Dietmar Metz. This is the finished Star Wars Tri-Jet being demonstrated at a trade show in Germany. Quite amazing degree of control for an electric ducted fan jet. https://www.youtube.com/watch?v=KFAsKHV5MLI

No but we do insure against damage to 3rd party persons and property.

RC jet of 2021. This thing is a beast. You would need around £25K GBP to own one. Specification: Length: 149.6" (3800mm) with the probe Wingspan: 96.7" (2457mm) Power: 2 x 16-20kg thrust Dry Weight: 26-29 kg https://www.youtube.com/watch?v=8Jd2qm5TWH4

These awesome RC A-10 Tank Busters are powered by micro gas turbine jet engines which give more than enough power for realistic vertical performance and speed on low passes. The black/white camo kit is made by Skymaster Jets and the all grey version is made by Mibo. Both leading manufacturers in the radio control jets of many different types. These models were flown by Steve and Mick, both regular UK RC Show pilots. The Skymaster A-10 is 1:6.25 scale with length 2552 mm (101.3”) and wingspan 2784mm (109.6”). Dry weight is 20kg to 22kg (45-48Lbs) and the model needs 13-15 servos. Mick's Mibo A-10 is a generation 6 kit has electric retracts and brakes is 3m span and weighs 54lbs dry 66 at take off. The model is powered by two Kingtech 160G series2 turbines giving a total of 78lbs thrust from 7Ltrs of fuel which it burns in 8mins. The decelerons (the name for the split ailerons) were my own modification so in that respect the example is unique. His A10 is modelled on the USAF air show demonstration aircraft which flies a known demo schedule an example of which can be found on YouTube "A10 RIAT 2011" so carries no armament or Penny Pod. The model is guided by Jeti DS24 radio uses a Centrebox 400 power distribution and 2 three cell LiPos it also runs 15 servos. https://www.youtube.com/watch?v=w53tIIedsL0

This seriously large P-47 was flown at the Wings and Wheels RC Model Spectacular by John Mason of TJD Models. It has wingspan of 122 inches, the weight is around 70 lbs and the model is powered by a DLE-170. Other engine options for this giant are the DA-200, DLE-222, MOKI 250 and 300. Plan available at http://www.meister-scale.com/Thunderbolt25/index.html https://www.youtube.com/watch?v=ErEbrmYUn5g

I've flown a few 'ornithopters' and this is by far the best flying I have tried out. Super simple to assemble as well. Hours of fun for the pilot and local wild life.

Robbie Skipton displaying his 55% Ultimate and during the display he pushes out of an inverted pass and touches the rudder on the deck ! https://www.youtube.com/watch?v=1boapL-o5dw

So easy to install this engine. Bolt to the ply rails and then with one electronic cable and one fuel line it was minutes to get it all hooked up and ready for it's first start. https://www.youtube.com/watch?v=_ipYXRBmtEg

These guys have been practicing their formation flying for a long time. That's how they got so good at this. They are flying Bill Hempel Clipped Wing Cubs. These radio controlled aircraft have a wing span of 18 feet (216 inches) and are designed for the 3W-275cc engine but Azza and Sonny used the ZDZ 420B4-J. The weight is approximately 94-96 pounds. https://www.youtube.com/watch?v=eOpWloE-JxA

Design inspired by a 1:72 scale Airfix kit and powered by 2 45N turbine engines. An amazing scratch built F-4 Phantom. https://www.youtube.com/watch?v=7mjrIFHUQoo

Superb scratch built A-10 flown at recent Large Model Association Elvington Show. https://www.youtube.com/watch?v=n4VhRpNR6qw

HSD jets Me-262. Considering it's EDF it flies very nicely. https://www.youtube.com/watch?v=3gNLS2Fg31w

Walking around the Southampton International Boat Show after filming some large RC powerboats in action and I stumbled across the trade stand for Swellpro. A manufacturer of multirotor aircraft/drone for the marine industry. Didn't know waterproof drones existed! They can take off and land on water and survive full immersion. Makes them suitable for many more applications that your typical drone. Dan of Swellpro UK gave me a quick intro.

Each built from scratch and flown in close formation without any fear. These are skilled builders and pilots putting on a great show for the public.

Totally different kettle of fish and I think us RC 'pilots' know that...

Robbie Skipton doesn't just fly these monster radio controlled aircraft, he also designs and builds them from scratch. https://www.youtube.com/watch?v=T0igCSG_jcY

I've seen similar RC aircraft suffer worse abuse. Pylon racers, dynamic soarers, and some other turbine powered aircraft. The skill is in the design and construction of these things for me.

Not often you see something fresh and innovative. This is the NEW Jeemo. A performance glider with a 45N jet turbine engine INSIDE the fuselage. No wonder it's so quick and agile. https://www.youtube.com/watch?v=IDBexxuQsyc

So clever. Combines the ease of flying a drone with the efficiency of flight. Vertical take off and landing with one button used to transition to regular flight and back to hover again. No moving control surfaces. Roll and yaw achieved through differential thrust. Integrated FPV with real time view streamed to the controller. Strangest but coolest looking thing I have flown in a while !

Skilful demonstration of aerial firefighting at the new Popham Model Show. In that crosswind it was quite a challenge !

Filmed this superb scale helicopter at the recent, new, Popham Model Show. Great flying by the owner. https://www.youtube.com/watch?v=WyGshm_u26k

Piloted by Keith Mitchell, this model took 5 years of combined design and construction. This model aircraft was initially designed by Tony Nijhuis and part-built - was extensively rebuilt by Keith's modelling mate, Peter Johnson. Its initial flights were taken under the Large Model Association scheme (approved by the CAA) for model aircraft over 80KG. It underwent 12 test flights for combined flight time of more than 2 hours to get it's LMA\CAA certificate to fly at public shows. During this flight at Elvington Keith was battling a strong gusty cross wind. The cross wind landing was extremely skilful and amazing to watch. Judging from his reaction I don't think Keith enjoyed it so much but the watching crowd were certainly very appreciative that he put on a good show. Specifications of this fantastic model. Wingspan: 21 Feet Length: 19 Feet Weight: 220 Lbs Engines: 4 x ZDZ 90cc petrol Props: 4 x 28 x 10 Biela Carbon Radio: Futaba 14 Channel Servos: 22 (13 channels for ailerons, elevator, rudder, flaps, throttle x 4, landing gear and lights) https://www.youtube.com/watch?v=Voqw7cTuOBU

Day 2 of water trials of this amazing project with commentary from Alex Jones of The Little Jet Company. https://www.youtube.com/watch?v=zbDP2_uhZ4E

Sharing vide of the first water trials of this amazing 1:4 scale twin turbine powered Convair Sea Dart created by The Little Jet Company. The Convair F2Y Sea Dart was an American seaplane fighter aircraft that rode on twin hydro-skis during takeoff and landing. It flew only as a prototype, and never entered mass production. It is the only seaplane to have exceeded the speed of sound. It was created in the 1950s, to overcome the problems with supersonic planes taking off and landing on aircraft carriers. The program was canceled after a series of unsatisfactory results and a tragic accident on 4 November 1954, in which test pilot Charles E. Richbourg was killed when the Sea Dart he was piloting disintegrated in midair. The four surviving planes were retired in 1957, but some were kept in reserve until 1962. In this first video you will see the Sea Dart on the water and accelerate to a fast taxi for the first time. Video of the second test is coming very soon! SPECIFICATION: Length (including pitot tube): 5 meters Power: Twin JetCat P300s Guidance: Jeti Radio Electronics: MKS servos on Flight controls. Savox waterproof servos on Water Rudder. Weight: 100 kgs with fuel https://www.youtube.com/watch?v=bm2FjRvnSVs

Truly spectacular scratch built aeromodelling. In a world of ready to fly RC aircraft these are rare and beautiful to watch in action. These aircraft are built from Falcon Aviation kits and Tony Nijhuis plans, have a wingspan of 17 feet and are 1/6th scale. Each model weights about 87 pounds without fuel and are powered by four Zenoah 38s. https://www.youtube.com/watch?v=KDjWx2gtrRQ