Dynon EDC-D10A remote magnetometer service bulletin

[WestCoast]

Just in case anyone with a Dynon EDC has not seen this bulletin....here is the link

 

http://dynonavionics.com/docs/support_bulletin_110107.html

 

Regards,

 

Dave

 

 

[Captain]

Thanks Dave.

 

I have exactly that unit and hadn't spotted this bulletin.

 

Regards Geoff

 

 

[WestCoast]

I have just completed the service to the Dynon EDC-D10A as per the Service Bulletin and found it very straight forward. The actual removal of the diode only took about one minute (I used a pair of precision side cutters) however getting the EDC back onto the mounting plate in the left wing was no easy feat........unless you are a master of keyhole surgery :confused:

 

Dave

 

 

[Captain]

Dave

 

 

 

What do your "precision" side cutters look like?

 

 

 

Can you post a little photo of 'em or give me a link to somewhere.

 

 

 

I assume that they are more precise than my normal units ... see below.

 

 

 

Regards Geoff

 

 

 

[Admin]

Are these any good Cap't http://www.recreationalflying.com/shopold/index.php?target=products&product_id=29853

 

 

[WestCoast]

Geoff...this is what I bought. I needed them in a hurry so got them at the airport shop. The pair pictured in the Rec Flyers shop look good also.

 

 

 

[Captain]

Thanks for that Dave.

 

I'll hook a pair from the shop as I need a couple of other bits as well ............. did it tonight.

 

Thanks also for your post Ian.

 

Best regards Geoff