Hi All,

anyone have one of these older style ring mounts serviceable lying around they are willing to part with?

it is from a RV but might be found on other aircraft.

This is a Van's made mount not a Rotax brand mount was not sure at time of original Ad. 
 

I have two new unopened MATCO MC-5 Brake Rebuild Kits for sale.

I ordered the wrong size kits so am selling these at half new retail price (Original invoice will be enclosed with package).

See photos for what is in the kits.

Postage at cost - message me for a postage quote.

PM if you have one laying on the shelf gathering dust worth selling.

Thanks,

Removed for upgrade. 12v. Perfectly functional, in good condition. Includes wiring loom. Great upgrade from a vacuum driven unit. Pickup or post...

Control Column accessory mount - not used

Two homemade damage resistant Transponder antenna - never used

The following items are for sale. Make me a fair offer and the group is yours + delivery (which could be free, if within 130 Nm flying range of The Oaks, you can wait for flyable weather and you shout me a refreshment).

I am making no claims as to function, some stuff was working when removed (years ago), some I inherited with my aircraft, never seen installed /operating.

Much preferer to sell by the groups shown OR  the lot to one purchaser.

More details & photos' available on request;

Comms photo;

Transceivers:

ICOM-A20 x 2 

DELCOM X 1

Antenna to suit

Batteries to suit - two batteries never used

Delcom Intercom - INT 2000 (two place)

Instruments Photo:

VSI 3" - ft/min

VSI 2"  - Cambridge Aero Instruments - knots

Transponder - King KT776A

Autopilot - Cambridge Aero Instruments

Slip Ball 2.25" - ?

Automotive vacuum gauge - might be fun to have on your panel.

Hi All,

Looking for a operational 2-2.25" back up ASI . Airspeed range aproximately 20-160 knots. Something similar to this:

Aircraft Alloy Landing Gear - Volksplane VP2 design. Suitable for various types of kit or scratch built tail dragger aircraft. Purchased for a kit aircraft build, but have gone to an extended tall gear to accommodate 29" bush tyres.

Gear Dimensions: Width - 1905mm (75"),  Height - 660mm (26"),  Hub to hub - 1640mm (64.5"), Suspension - Rubber disc inside fairings, Wheels - Cessna Rims and Hubs, Tyres - 6.00 - 6".

Braked Hubs could be fitted. Approx weight - 25Kgs. $350 ONO

Located: Beaudesert, or Nerang, Qld.

Dynon SV-COM-X425 VHF Transceiver (25KHz) ACCEPT PAYPal or bank deposit

needed for parts

Hengst H102 WK & H103 WK FUEL FILTERS

I have a quantity of these terrific in-line gauze fuel filters. Fitted, as standard, to many European recreational aircraft.

Compact : Spigots 8mm in/out : Height approximately 103 mm : Diameter approximately 36mm

Light weight (9 grams)

Clear casing, for good visual inspection. No nasty pleats to hide contamination.

So tough can only be damaged by taking a hacksaw/hammer/flame to them. Peak pressure 217 psi

No leaks from these little beauties

Can be cleaned (carby cleaner & compressed air) but cheap enough at $15/each, to just put a fresh one in.

Delivery at your cost

This item is no longer available- SOLD

Wanted - Turn and Bank and Directional Gyro steam gauges for Jabiru. Pic for Info

As new complete kit with regulator, capacitor and OV protect. Installed but never run.

Originally planned as primary on a lightweight build but I ended up needing a bit more juice.

I am a PPL as well as A&P / Rotax iRMT mechanic who has been supporting the LSA pilots and owners in the southeast of Florida.

I am hoping to find a Rotax diagnostic cable to connect my laptop to the engine ECM (electronic control module) on 9 series aircraft engines.

I am a 'Fan' of 9 series Rotax aircraft engines... especially when they are moving air efficiently, reliably, and safely!

I am hoping to acquire a no longer used / un-needed Rotax BUDS cable, perhaps collecting dust in a hangar, toolbox, or desk drawer. Sold the airplane, hired a mechanic, or even an estate liquidation.

I shudder to think how many of these got sent to the landfill as it looks like just a video game wire.

Keep your eyes peeled. A complete set will include the wire pictured and perhaps a Y splitter and there is also a Code KEY number that makes it all work, included on a sticker on the original box top. [the KEY code is specific to each serialized cable and either (code or cable) is worthless without the other]

The cost of the kit to build the wings is well in excess of four times my asking price - so if you'd like to save 75% of the cost of the kit, as well as saving the 6-weeks it takes to build the wings, then grab this now.

I'm based in Brisbane.  Please feel free to drop me a line and come see for yourself.  Sorry about some of the photos being upside-down - I don't know whiy this is, and I couldn't fix it.  Apologies.

I have a number of new Hobbs meters available - Hobbs P/N 169635.

These are 12V-60VDC, are fully sealed, have 2 bayonet connectors, and come with a rectangular plastic stirrup to hold them in the panel.

They don't have holes in the face panel for screws, but they have dimples indicating where you can drill, if you prefer screw attachment.

$45 inc postage to anywhere in Australia. They're cheaper, and faster delivery, than getting them from the U.S.

SOLD

SkyEcho is a portable ADS-B IN/OUT transceiver consistent with the UK, Australian and New Zealand Electronic Conspicuity standards.

It enables you to SEE and BE SEEN by transmitting your aircraft position, altitude, course, and speed to surrounding aircraft, and receiving ADS-B data for display in your Electronic Flight Bag (eg iPad)

Excellent condition.

Comes with suction mount, and original packaging.

Will be factory reset prior to dispatch

Wanting to purchase an exhaust muffler and rear pipe for a Jabiru 2200 powered Bantam B22J. (Or can someone post detailed photos of the exhaust installation up through the wing) I’m based in NZ, so ideally local.

Looking for old damaged or undamaged aircraft cowls, needing to make a new cowl for a Karatoo and is easier to make from another cowl than from scratch

any condition 

Cheers

I am looking to buy an Airborne Wizard wing to suit an Edge X 582.

(Yes, I know the factory has shut).

I could possibly swap a good Streak wing for it.

We can discuss Rego and Bettsometers if it gets that far.

Thanks for your help.